ZYNM7 is the austenitic Mn-Cr-N grade we quote for medium-strength non magnetic drill collars: 758 MPa minimum yield, 120 J impact, relative permeability 1.005 max, made to Zhongyuan Special Steel’s Q/ZTG23-2018 and certified per heat.

ZYNM7 is a low-carbon, high-manganese austenitic steel made by Zhongyuan Special Steel to Q/ZTG23-2018. Nitrogen holds the austenite stable, so the bar stays non-magnetic after cold working and after machining — the property that matters when the collar sits directly above an MWD sensor. It is the grade we quote when a drawing calls for a medium-strength Mn-Cr-N collar in the 758 MPa class.
Grade and specification
| Item | ZYNM7 |
|---|---|
| Mill | Zhongyuan Special Steel (ZYTG) |
| Works specification | Q/ZTG23-2018 |
| Type | Austenitic Mn-Cr-N, low carbon |
| Product forms | Forged bar, rolled bar, hollow bar, cut-to-length |
| Condition | Solution annealed; cold-worked HS temper on request |
We supply the mill’s grade under the mill’s name. The certificate, the heat number and the grade designation all come from Zhongyuan, not from us.
Applications
Non-magnetic drill collars, MWD and LWD housings, stabilizer mandrels, non-magnetic subs and cross-overs, and compressive-service drill pipe where the string has to stay magnetically transparent.
- Slick, spiral and flex collars for directional and horizontal wells
- Sensor housings that must hold permeability through machining and service
- Subs and cross-overs machined from peeled bar
- Components that see chlorides but not severe sour service
Sizes and delivery
| Form | Range |
|---|---|
| Forged / rolled round bar | OD 80 – 300 mm |
| Hollow bar and collar blanks | OD 90 – 280 mm, bore to drawing |
| Cut-to-length | Any length up to 6 m |
| Stock | Common collar sizes held; 7 days to dispatch |
| Custom melt | 3 – 5 t minimum for a fresh induction melt |
Chemical composition
Heat analysis, mass percent, to Q/ZTG23-2018.
| Element | ZYNM7 | Element | ZYNM7 |
|---|---|---|---|
| C | max. 0.03 | Cr | 17.0 – 18.6 |
| Si | max. 0.50 | Mo | 0.45 – 0.75 |
| Mn | 19.0 – 22.0 | Ni | 1.9 – 2.5 |
| P | max. 0.025 | Cu | max. 0.20 |
| S | max. 0.010 | N | 0.45 – 0.75 |
Niobium max. 0.05. Full limits are printed on the mill certificate; a specimen certificate is available before you order.
Mechanical properties
Minimum values at room temperature, longitudinal.
| Property | OD ≤ 203 mm | OD 203 – 279 mm |
|---|---|---|
| Yield strength Rp0.2, min. | 758 MPa | 689 MPa |
| Tensile strength Rm, min. | 827 MPa | 827 MPa |
| Elongation A, min. | 20% | 20% |
| Reduction of area Z, min. | 50% | 50% |
| Impact KV, min. | 120 J | 120 J |
| Hardness | 285 – 385 HBW | 285 – 385 HBW |
Relative permeability ≤ 1.005 and magnetic field gradient ≤ 0.04 µT, verified on every bar. A cold-worked HS temper reaching 965 MPa minimum yield is available — state the temper on the enquiry.
Melting and processing
- Melting: induction furnace or EAF, AOD refining, LF homogenising, then vertical casting or ingot.
- Hot working: forged or rolled with a reduction ratio of at least 6.
- Heat treatment: solution annealed and water quenched; warm forging followed by quenching to keep grain boundaries free of carbides.
- Finishing: peeled, turned, BTA bored, gun-drilled to drawing.
Inspection and certification
- Chemical analysis and mechanical testing per heat, ASTM A370
- ASTM A262 Practice A and E for intergranular attack
- Full-length ultrasonic inspection to API Spec 7-1 clause 12
- Probe testing of permeability on every bar, printout supplied
- EN 10204 3.1 certificate as standard, 3.2 and SGS / TÜV on request
Need ZYNM7 non magnetic drill collars?
Send the size, condition, quantity and any NACE or PMI requirements — we reply with mill availability, lead time and a priced offer, usually within one working day.